Pre receive hook declined что делать
36 Answers 36
Your commits were rejected by the pre-receive hook of that repo (that’s a user-configurable script that is intended to analyze incoming commits and decide if they are good enough to be accepted into the repo).
It is also a good idea to ask that person to update the hook, so it would print the reasons for the rejection.
If the maintainer is you yourself, then it looks like you’ve got a problem with your setup on the server-side. Please share more information then.
File size is important. There is a limit of
pre-receive hook declined was as a result of the big file. Basically validating the push.
To resolve it, I removed the last commit using:
I then excluded the file from the commit.
In my case I got this message because the branch was marked as ‘Protected’ in GitLab.
I got this message when the GitLab server was undergoing some changes. The next day pushing worked fine. Anyways, as others pointed out, check with your maintainer to be sure.
I encountered this same issue.
What solved it for me was to switch to another branch and then back to the original one.
Not sure what the underline cause was, but this fixed it.
I had this issue when trying to merge changes with file size greater than what remote repository allowed (in my case it was GitHub)
In case it helps someone :
Bitbucket: Check for Branch permissions in Settings (it may be on ‘Deny all’). If that doesn’t work, simply clone your branch to a new local branch, push the changes to the remote (a new remote branch will be created), and create a PR.
I faced the same error, upon checking I had a developer access and couldn’t publish a new branch. Adding higher access rights resolved this issue.(Gitlab)
I got this error with GitHub gist. I was trying to push a commit with files in sub-directories. Turned out gist can only have files in root directory.
Remove the protected branch option or allow additional roles like developers or admins to allow these users experiencing this error to do merges and push.
This is actually happens when YACC is enabled at server side in BitBucket. YACC is enable for JIRA issue names to be mentioned in the commit message. So whenever you commit anything atleast keep your JIRA number into the commit message and then additionally you can add your own message.
For me Authorization on remote git server solve the problem. 
I was using GitKraken and we made a local branch, then we merged two remote branches in it and then we tried to push the local branch to origin. It didn’t work with the same error message.
The solution was to create the local branch and push it first to origin and then do the merge.
I’ve faced the problem of unable to push my changes to my origin branch and anything to master branch of a particular project repository as the size of that repo was over hard limit of 2GB. It was throwing the error. That’s because we had pushed the test data unknowingly to bitbucket from other testing branches.
So tried checking is that the same with other project repo’s and they weren’t having any issues.
My colleague noticed that when we cloned the project back locally, the size of the project was 110MB. So then we started cleaning the branches we merged earlier and active branches which are no more required. Once that cleaning is done for couple of branches we realized the size of the repo went drastically down from 2GB to 120MB. Then we tried to push the changes to my branch and it worked.
Ошибка Git при попытке push-pre-receive hook отклонена
14 ответов
ваши коммиты были отвергнуты pre-receive крючком этого РЕПО (это настраиваемый пользователем скрипт, который предназначен для анализа входящих коммитов и решения, достаточно ли они хороши, чтобы быть принятыми в репо).
также хорошая идея попросить этого человека обновить крючок, чтобы он напечатал причины отказа.
размер файла важен. Существует ограничение
pre-receive hook отклонен в результате большого файла. В основном проверка толчка.
чтобы разрешить его, я удалил последнюю фиксацию, используя:
затем я исключил файл из совершать.
надеюсь, что это помогает.
Это может быть вызвано тем,что у вас не было права нажимать фиксацию на какую-либо ветку,например master, вы можете попросить сопровождающего дать вам право нажимать
У меня была эта проблема при попытке объединить изменения с размером файла, большим, чем разрешенный удаленный репозиторий (в моем случае это был GitHub)
Я получил это сообщение, когда сервер GitLab претерпевал некоторые изменения. На следующий день толчок сработал отлично. В любом случае, как указывали другие, проверьте с вашим сопровождающим, чтобы быть уверенным.
в моем случае я получил это сообщение, потому что ветка была отмечена как «защищенная» в GitLab.
Я столкнулся с этой же проблемой.
Для меня было решено переключиться на другую ветку, а затем вернуться к исходной.
Не уверен, что причина подчеркивания была, но это исправило ее.
Я использовал GitKraken, и мы сделали локальную ветвь, затем мы объединили в ней две удаленные ветви, а затем попытались подтолкнуть локальную ветвь к origin. Он не работал с тем же сообщением об ошибке.
на решение С создайте локальную ветку и нажмите ее сначала в origin, а затем выполните слияние.
Я получил это при попытке нажать на экземпляр dokku. Оказывается, диск был полон на моем сервере.
Это на самом деле происходит, когда YACC включен на стороне сервера в BitBucket. YACC позволяет имена проблем JIRA, которые будут упомянуты в сообщении фиксации. Поэтому всякий раз, когда вы совершаете что-либо, по крайней мере, держите свой номер JIRA в сообщении фиксации, а затем дополнительно вы можете добавить свое собственное сообщение.
для меня авторизация на удаленном сервере git решит проблему. 
в моем случае это потому, что я случайно добавил гигантский файл к моему незафиксированному толчку, и я не мог избавиться от него, независимо от того, что я сделал после этого.
мое грязное решение, но работоспособное решение-переименовать текущий каталог, повторно клонировать каталог на локальный и отразить изменения вручную в повторно клонированный локальный каталог.
I’m working in rails 3.2 and I receive an error when I try to push to heroku:
I have tried the few methods recommended on this forum, including emptying and reinstalling the Gems and deleting and adding the remote, to no avail.
26 Answers 26
Make sure that your Rails app is in the root of the repo, the Gemfile is present and properly named. It is basically not able to detect your code base as one of the supported project types and hence failing it. Also, even if you do have a proper project, make sure it is part of the repository and you have committed it fine ( git status will help you here and a ls should help you verify the project structure).
I know this is an old question, but still posting this here incase someone else gets stuck.
In Heroku, you may have problems with pushing to the master branch. What you can do is to start a new branch using
and then push using
You might also want to check for Heroku telling you there’s a typo in your CSS file.
You can do a find for rake aborted! and directly after that it should say why the push failed.
If you get this error and the terminal is not descriptive enough to help you, Heroku might be able to tell you what is wrong through their website. Try the following:
In my case, I had accidentally ignored my Gemfile.lock.
Your package.json file will look something like this:
I had the same issue.
It was my problem and resolved to my case.
The package setuptools/distribute is listed in requirements.txt. Please remove the same.
For completeness, the issue may be heroku itself. In rare cases like these https://status.heroku.com would show something along the lines of:
The Heroku Dashboard and Elements have been restored. We are still working to restore the other affected services.
The services still affected are:
I was able to deploy about 40 minutes later after heroku reported:
All affected services have been restored and are now working as expected. We will be monitoring to ensure there are no further issues.
Through 2 days of trying. this worked heroku buildpacks:set https://github.com/heroku/heroku-buildpack-nodejs
In part it was my proxy and the buildpack
just in case you have this problem while trying to push a django app to heroku and then you get this error:
simply look for this :
This should solve your problem if Django app is what you are trying to push.
git, Heroku: pre-receive hook declined
I am in the process of setting up a git repository and attempting to link it to Heroku. When I run the command
I’m not quite sure what other information would be helpful and what will just muddy the waters, so I’ll just leave it at this for now. Any help getting my application pushed to Heroku would be greatly appreciated. Thanks.
22 Answers 22
Make sure you are pushing a repo that contains a proper supported app ( Rails, Django etc.) and you are not just pushing some random repo to test it out.
If that is not the case and you are pushing what you think is a valid app, contact Heroku support and they will fix it for you.
Make sure that you are using either npm or yarn.lock file-
Two different lockfiles found: package-lock.json and yarn.lock Both npm and yarn have created lockfiles for this application, but only one can be used to install dependencies.
After deleting yarn.lock and pushing the code again to git, my issue resolved.
Deleting package-lock.json solved it for me
I faced the same problem:
I realized that my heroku application Stack is ‘cedar-10’ and was deprecated from 04/11/2014 and disabled from 04/11/2015 (Cedar-14 is now Generally Available).
The solution was to upgrade the heroku application Stack following the guide:
Another issue could be that in a production environment, you can’t use sqlite3, the default database when you make a rails app.
In order to fix this, just change the database your rails app uses to Postgres. This can easily be accomplished by editing your Gemfile
From your Gemfile, remove:
and add the following:
I had the same problem but with a Django app, it turned out that pip wasn’t able to download/install one of the dependencies of the requirements.txt file (it was eyeD3)
A little late to the game, one of my issues was I had an outdated sshkey. Just need to update that in the settings.
In case if this needs anyone in future even though I am a beginner and doesn’t know much about Heroku, you may have requested a version in runtime.txt file which the stack doesn’t support.
python-3.8.2 to python-3.8.10
Changing from python-3.8.2 to python-3.8.10 helped me solved it. You may see the supported stacks here: https://devcenter.heroku.com/articles/python-support
I decided to read the logs line by line. Below is part of the error logs:
From where the error started, «npm ERR! code ELIFECYCLE» I read up and I found the actual cause of the error. It was a CSS rule. I first removed the rule and it built. Then I checked my declarations and found out I was contradicting myself.
First, disable collectstatic:
For more details and full steps, check here.
3)then i am agian triyng to push code to heroku it says same error
as above
I had this with a sinatra application. (Heroku does support Sinatra).
The instructions on the heroku blog post were incomplete
My program ran fine locally but I got that error when trying to push to heroku.
The heroku blogpost didn’t include the need to make a gemfile and do bundle install. The program was running locally fine, but to make it work on heroku it needed a Gemfile and bundle install on it.
this link here https://teamtreehouse.com/community/how-can-i-make-my-sinatra-app-public mentioned that I needed a Gemfile, and mentioned the contents of the Gemfile. And then to do bundle install. Then once that is done, then follow the instructions on that heroku blog post, of making the program file, and the config.ru and the git repo and doing heroku create (which also creates the remote), then git push heroku master.
Gemfile as mentioned at treehouse link
And bundle install to install that Gemfile.
Git Push-ошибка крюка предварительного получения отклонена
1) Я не активировал пользователя (владельца проекта) по ссылке активации по электронной почте, потому что я не настроил почтовый сервис на стороне сервера и не нашел инструкций, как это сделать в этом руководстве.
2) Сервер Gitlab генерирует советы, как подтолкнуть проект к репо, и его нет repositories/ в пути. Я имею в виду, что он генерирует, git@mygitlabhost:user/repo.git а git@mygitlabhost:repositories/user/repo.git не правильно.
GitLab по умолчанию помечает master ветку как protected (см. Часть Protecting your code в https://about.gitlab.com/2014/11/26/keeping-your-code-protected/ почему). Если так в вашем случае, то это может помочь:
Откройте ваш проект> Настройки> Репозиторий и перейдите в раздел «Защищенные ветви», найдите в списке «главную» ветку, нажмите «Снять защиту» и попробуйте снова.
Следующая проблема решена на моей локальной машине:
A. Во-первых, убедитесь, что вы используете правильные данные для входа в систему для подключения к Bitbucket Server (т. Е. Имя пользователя / пароль / ключ SSH, который принадлежит вам)
C. Если вы использовали не ту учетную запись, просто измените учетные данные своей учетной записи (имя пользователя / пароль / ключ SSH) и повторите попытку.
D. Иначе, если ваша локальная конфигурация неверна, вам нужно будет изменить ее
ПРИМЕЧАНИЕ. Вам придется исправить старые коммиты, которые вы пытались нажать.
Изменить свой последний коммит:
Попробуйте повторно подтолкнуть ваши коммиты: