Researchdownload operation failed что делать
Инструкция по прошивке Spreadtrum смартфонов через Research Download
Инструкция по прошивке смартфона на чипсете Spreadtrum через ResearchDownload
Что нам понадобится:
3. После выбора прошивки, программа «подвиснет» на некоторое время и после этого имя загруженной прошивки отобразится в верхней части программы
4. Далее, убедитесь что ваше устройство отключено от ПК и нажмите значёк Play (стрелка вроде «>») в окне ResearchDownload, чтобы перевести программу в режим ожидания подключения смартфона
5. Далее берём наш смартфон в руки, выключаем его полностью. Если у вас съёмная батарея, то вытащите её и вставьте обратно, но не включайте смартфон, если батарея несъёмная, то можно пропустить данный пункт. Итак, после того как «передёрнули» батарею, подключаем смартфон к компьютеру и при этом держим кнопку уменьшения звука.
6. После подключения смартфона, как описано ниже, в окне программы ResearchDownload, должна будет начаться прошивка, как только она стартует, можно будет отпустить кнопку уменьшения звука и просто дождаться завершения прошивки. Если прошивка не стартует, то, скорее всего не установлены драйвера. После завершения прошивки вы увидите надпись «Passed», после этого можно отключить смартфон (рекомендую еще раз «передёрнуть» батарею») и запустить его. Имейте в виду что после перепрошивки, первый старт смартфона, может длиться долльше обычного (не паникуйте сразу).
Cкачать:
RESEARCHDOWNLOAD_2.9.7003.zip
[Tutorial] Research / Upgrade download tool errors, meanings & fixes
Below is a comprehensive list of Research / Upgrade Download tool errors, what they mean and how to fix them. We’ll keep building this list to ensure it captures all errors and proffers effective solutions. Ensure to see the tutorial on how to use Research Download tool / Upgrade Download tool to be sure you’re doing it right else you’ll keep running into error after error. Research Download tool & Upgrade Download tool are Windows desktop applications for flashing firmware / pac files to Spreadtrum (SPD) Android devices.
List of Research Download tool / Upgrade Download tool errors and their solutions
Phone is totally dead
Message: The phone doesnt respond to power button or only vibrates after pressing the power button but doesnt come on
Meaning: The OS is either corrupted or there’s no power to boot the phone
Research / Upgrade download tool does not show waiting. instead, the phone just charges
Message: After you click Start and connect the phone to the PC, the tool doesn’t show waiting. Instead, the phone begins charging or shows a charging sign. You could sometimes get the USB connection-disconnection sound on the PC
Meaning: The Spreadtrum drivers have not been properly associated with the device
Progress bar stuck at waiting.
Message: After clicking Start Downloading and connecting the phone, the Progress bar gets stuck at Waiting.
Meaning: The tools is having problems finding the phone
Failed: NV data in device is crashed
Message: Failed: NV data in phone is crashed
Meaning: The tool is unable to properly read nv data items on the phone
Failed: NV data read in phone is crashed
Message: Failed:NV data read in phone is crashed
Meaning: The NV items (Calibration) are causing a clash
USB device not recognized
Message: USB device not recognized prompt at system tray after connecting the phone to PC
Meaning: The PC is having problems communicating with the phone (often due to interruption, hardware or driver problems)
Failed: Operation failed
Message: Failed: Operation failed error during flashing
Meaning: An error was encountered during flashing
Failed: download size error
Message: Failed: download size error
Meaning: There was a problem flashing a file to its assigned partition due to its size
Downloading failed : wait input time out / remote data too large
Message: Downloading failed : wait input time out
Meaning: A timeout was reached as a result of the flashing process taking too long
Failed incompatible partition
Message: Failed incompatible partition
Meaning: There was an error flashing to certain partitions
Stuck at checking Bautrate
Message: Checking Bautrate
Meaning: The tool encountered an error initializing flashing
Failed: buffer error
Message: Failed: decode or verify received buffer error
Meaning: The tool encountered a problem flashing the pac file
Failed: uart send error
Message: [Removed] Failed: uart send error
Meaning: The flashing process got interrupted
The second enumeration port timeout
Message: Failed: The second enumeration port timeout
Meaning: There was an error maintaining communication to the device
Image size is over its partition
Message: Failed: Image size is over its partition
Meaning: One or more of the files in the firmware (pac file) is too large
Failed: User cancel
Message: Failed: User cancel
Meaning: The flashing process was interrupted by holding or releasing the volume down button at the wrong time
Meaning: The tool is unable to read the calibration data off the device or the device isn’t properly calibrated
Failed: Open port fail
Message: Failed: Open port fail
Meaning: The tool encountered an error while communicating with the phone
_REPARTITION_ error
Message: Failed: Operation failed
Meaning: The tool encountered a partition table error while trying to flash the device
Solution:
Use Factory Download tool @ https://forum.hovatek.com/thread-15611.html or a box / dongle which supports your Spreadtrum chipset
Update Driver error
Message: Your driver version is *****, it is too low. Please upgrade download driver.
Meaning: The tool detects you still have an old driver and won’t proceed until its updated
Solution:
Download and install any driver from ‘version 2015″ upwards @ https://forum.hovatek.com/thread-26658.html
Flashing failed or stuck at System.img
Meaning: The tool encountered an error while trying to flash system.img
Failed: the data packet with type(0x96) returned was misformatted
Message: Failed: the data packet with type(0x96) returned was misformatted
Meaning: The tool is unable to proceed with flashing the specified firmware
ReadPartition Finish
Message: Failed: Software has not supported this feature
Meaning: A backup setting is interfering with flashing
Bin packet version is not support
Message: Bin packet version is not support! Load bin packet failed!
Инструкция по прошивке Spreadtrum смартфонов через Research Download
Инструкция по прошивке смартфона на чипсете Spreadtrum через ResearchDownload
Что нам понадобится:
3. После выбора прошивки, программа «подвиснет» на некоторое время и после этого имя загруженной прошивки отобразится в верхней части программы
4. Далее, убедитесь что ваше устройство отключено от ПК и нажмите значёк Play (стрелка вроде «>») в окне ResearchDownload, чтобы перевести программу в режим ожидания подключения смартфона
5. Далее берём наш смартфон в руки, выключаем его полностью. Если у вас съёмная батарея, то вытащите её и вставьте обратно, но не включайте смартфон, если батарея несъёмная, то можно пропустить данный пункт. Итак, после того как «передёрнули» батарею, подключаем смартфон к компьютеру и при этом держим кнопку уменьшения звука.
6. После подключения смартфона, как описано ниже, в окне программы ResearchDownload, должна будет начаться прошивка, как только она стартует, можно будет отпустить кнопку уменьшения звука и просто дождаться завершения прошивки. Если прошивка не стартует, то, скорее всего не установлены драйвера. После завершения прошивки вы увидите надпись «Passed», после этого можно отключить смартфон (рекомендую еще раз «передёрнуть» батарею») и запустить его. Имейте в виду что после перепрошивки, первый старт смартфона, может длиться долльше обычного (не паникуйте сразу).
Cкачать:
RESEARCHDOWNLOAD_2.9.7003.zip
Prestigio PSP5502DUO требует _REPARTITION_
Assists
======= Flash
Files set for flashing :
[ MCU ] : SC7731_TE50B3G_5.1_PSP5502DUO.20160405.1.0.06_PSP5502DUO.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : SC7731_eMMC_TE50B3G_5.1_PSP5502DUO.20160405.1.0.06_PSP5502DU_INFINITY-BOX
File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : sc7731g_CP0_modem.bin
File : DSP_DM_Gx.bin
File : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
File : logo_720x1280.bin
File : fblogo_720x1280.bin
File : boot.img
File : system.img
File : cache.img
File : recovery.img
File : userdata.img
File : u-boot.bin
1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable
FlashMode Set : Ok!
PMTManager : Load 0x18 records
PMTManager : PMT Update Failed.
Selected firmware doesn’t match to current HW or EMPTY battery!
Flashing terminated!
Connecting to the SD/eMMC Card. OK
Выставленное I/O Напряжение 1.79V, SD_CLK Frequency is 6 MHz
_REPARTITION_ Operation failed SPD Phone
(25-03-2018, 11:53 PM) Muhammad Jayadi Anwar Wrote: Hey i tried to flash an SPD Phone with research download, everyting fine when i first use it, but not solve my problem, so i check that erase all flash, than i got error _REPARTITION_ operation failed.
Please help me.
(25-03-2018, 11:53 PM) Muhammad Jayadi Anwar Wrote: Hey i tried to flash an SPD Phone with research download, everyting fine when i first use it, but not solve my problem, so i check that erase all flash, than i got error _REPARTITION_ operation failed.
Please help me.
Have you tried a different pac file and the latest version of Upgrade Download tool?
Yes, different pac and different Research Download tool
tools
SPD_Upgrade_Tool_R19.0.0001
SPD_Upgrade_Tool_R2.10.1001
SPD_Upgrade_Tool_R4.0.0001
pac file
7731C_EMMC_SPRD_MITO A82_Android5.1_MITO_A82_20161025_T06_Repack
[firmware27]MITO_A82_20161025_T06
C7356_WVGA_A82_5.1_MITO_A82_20161025_T06_MITO_A82
CSTool_spd_7731C_EMMC_SPRD_MITO A82_Android5.1_MITO_A82_20161025_T06_20170718_021358
same error _REPARTITION_
this happen after i click «clean all flash», before that, flash succesfull but nothing change
you mentioned «nothing change»
does that mean after successfully flashing, the phone booted up without you going through initial setup and the phone was exactly as it was before you flashed?
i flash first pac file, then flashing success but still bootloop. i can go to recovery and wipe data.
but after flash another pac file, my boot logo broken, can’t go to recovery.
i flash first pac that success before, still broken and can’t go to recovery.
so it’s like flashing is success, but file not replaced or fixing any problem. then i tick «Clean All Flash» in configuration menu, and then this happend
(26-03-2018, 11:30 PM) Muhammad Jayadi Anwar Wrote:
you mentioned «nothing change»
does that mean after successfully flashing, the phone booted up without you going through initial setup and the phone was exactly as it was before you flashed?
i flash first pac file, then flashing success but still bootloop. i can go to recovery and wipe data.
but after flash another pac file, my boot logo broken, can’t go to recovery.
i flash first pac that success before, still broken and can’t go to recovery.
so it’s like flashing is success, but file not replaced or fixing any problem. then i tick «Clean All Flash» in configuration menu, and then this happend
(26-03-2018, 11:30 PM) Muhammad Jayadi Anwar Wrote: i flash first pac file, then flashing success but still bootloop. i can go to recovery and wipe data.
but after flash another pac file, my boot logo broken, can’t go to recovery.
i flash first pac that success before, still broken and can’t go to recovery.
so it’s like flashing is success, but file not replaced or fixing any problem. then i tick «Clean All Flash» in configuration menu, and then this happend