The system cannot find the file specified что делать

The system cannot find the file specified что делать

Вопрос

Добрый день, недавно столкнулся с такой проблемой.

Имеем файловый сервер с диском

8TB, который презентован с внешнего хранилища. На этом диске есть несколько папок, предоставленных по-отдельности в общий доступ. В сумме они занимают около 4TB.

Для бэкапа этого сервера имеем отдельный SCDPM 2012 build 4.0.1908.0 с ленточной библиотекой, но без выделенных HDD. На DPM создана PG, объединяющая все сетевые папки этого 8-терабайтного диска.

При попытке создания точки восстановления на ленту через 4-10 часов копирование завершается с ошибкой «The system cannot find the file specified (0x80070002)»

Я подозреваю, что в течение такого долгого копирования с большой вероятностью возникает какая-то сетевая проблема и бэкап полностью фейлится.

В данный момент я подумываю о разделении одной большой PG на несколько меньших, но по какой-то причине консоль не позволяет мне этого сделать. Если я удаляю сетевую шару из одной PG, то не могу добавить ее в другую, вновь созданную PG. Мне сообщается, что «Other Items of this datasource are members of another protection group.»

Теперь собственно вопросы:

1) Есть ли какой-то способ победить ошибку «The system cannot find the file specified (0x80070002)» без переконфигурации PG?

2) Можно ли вообще разделять PG, которая защищает ресурсы, расположенные на одном физическом диске?

Источник

Top 11 Solutions – The System Cannot Find the File Specified [Partition Manager]

By Bella | Follow | Last Updated December 01, 2021

Summary :

Top 11 effective solutions are listed here to help you fix the system cannot find the file specified error with ease. If you encounter this error while copying files, accessing files, connecting USB drive, you can try using MiniTool software to recover lost data in case of permanent data loss.

Quick Navigation :

Got the system cannot find the file specified error in Windows 10? Here, a true example from forums.ni.com is shown below:

The system cannot find the file specified Run into this error when installing my application on another PC (Win XP). Runs ok on my develop PC (Win7, LabVIEW2013 SP1). Anyone had this error before?

If you encounter the error “The system cannot find the file specified” when installing driver, or doing a system image, or accessing files, or doing other things, don’t worry. Now, you can check this tutorial to find reasons and solutions.

Generally speaking, it is a very common error for Windows users, especially for Windows 10 users, which usually indicates an Error Code 0x80070002. Some common reasons for this error are listed below:

Although the cause is unknown clearly, you can try the following solutions to solve your problem.

How to Fix Error The System Cannot Find the File Specified on Windows 10?

Solution 1. Run Antivirus Software to Scan Your Computer

The virus, cyber threats, and malicious attack are the common causes. It is recommended to run antivirus software to scan your system comprehensively to clean the malicious content and other junk files.

Solution 2. Open the Libraries Folder

According to users, you might be able to fix the system cannot find the file specified error simply by navigating to the Libraries folder which is hidden by default in Windows 10. Do the following to access it:

Open This PC.

Right-click the empty space in the left pane and choose Show libraries.

Now, you will find the Libraries folder in the left pane.

Solution 3. Install Windows Updates

If you haven’t updated Windows for a long time, the system cannot find the file specified error is a sign that you need to install all pending updates. Windows updates often fix both hardware and software errors, therefore we strongly suggest that you install the latest updates by following these steps:

Press Windows key + I.

Select Update & Security > Windows Update.

Click on the Check for Updates button and wait.

Install all the updates.

Restart the system to finish the installation of updates.

Data Recovery after Windows Update

If you find your files are missing after Windows update, try using MiniTool Partition Wizard. The best partition magic software not only can help you maximize disk performance but also can help to recover lost data.

MiniTool Partition Wizard offers Data Recovery feature to help you effectively and quickly recover lost data from damaged, formatted and deleted partition.

Step 1. Launch MiniTool Partition Wizard to get its main interface.

Step 2. Click Data Recovery feature on the top Tool Bar to get the following window.

Step 3. Select the drive/partition containing lost data and then click Scan button.

Step 4. After scanning, save all needed data in a safe place.

Thus, all work has been done! For more information, you can read this post: How to Recover Lost Data from Hard Drives | MiniTool Partition Wizard Tutorial.

Solution 4. Check the System Log Files

Another effective approach to fix the system cannot find the file specified error is to check the system log files.

Navigate to C:/Windows/inf directory.

Open inf folder.

Find file setupapi.dev, and then double-click on it to open the file. (In some cases, the file would be setupapi.dev.log.)

Press Ctrl as well as F at the same time to open Find box.

Type cannot find the file in the search box then start the search to locate the missing file.

Copy and paste it into the Windows/inf folder.

Reinstall the driver.

Solution 5. Change Your Registry

According to users, you can fix this error simply by modifying several registry keys. To modify the registry, do the following:

1.Press Windows key + R.

2.Type regedit, and press Enter.

You can create backup to secure your current registry condition. Click File > Export.

Next, enter the file name for the registry backup and select All under Export range section. Finally, click Save to save the backup. Thus, you can simply run this file to restore your registry to its original state in case anything goes wrong.

3.Navigate to the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion.

4.Expand the key and look for RunOnce key. You can create it if this key doesn’t exist. You just need to click the CurrentVersion key and choose New > Key from the menu.

5.Type RunOnce as the name of the new key.

6.Navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ key in the left pane.

7.Expand it and check if the RunOnce key has successfully been created. If not, repeat the above steps to recreate it.

8.Close Registry Editor and restart Windows.

9.If you still receive the system cannot find the file specified error after restarting PC, you should keep reading to find other solutions.

If you encounter this error after downloading the driver from manufacturer’s website, try the following steps:

Solution 7. Uninstall and Reinstall the Drivers

If you download the driver from manufacturer’s website and meet this system cannot find the file specified problem, you can try uninstalling and reinstalling the drivers to fix the error.

Go to Control Panel and select Device Manager.

Expand the category and locate the device you wish to uninstall.

Right-click on the device name and choose the Uninstall option from the context menu.

Check the “Delete the driver software for this device” and then click OK button to confirm the action (uninstall).

After uninstalling the driver, install the driver again.

Solution 8. Format Your USB Flash Drive

According to users, you might be able to receive the system cannot find the file specified error while inserting your USB flash drive or other removable hard drives. Now, to fix this issue, you can try formatting your hard drive.

Open This PC, right-click the USB drive and choose Format.

Check Quick Format option when the format window opens.

Click the Start button to start the formatting process.

Sometimes, you will find that Windows was unable to complete this format. Now, if you happen to meet this issue, you can know how to solve it by reading this post How Do I Fix «Windows Was Unable to Complete the Format» Error.

Solution 9. Restore or Repair the Missing Files

As we know, most people encounter the system cannot find the file specified error when trying to access or backup some files stored on the system. This is because that the file is damaged or corrupted. To fix this problem, you need to run chkdsk command to restore or repair the missing files.

Solution 10. Use WinRAR

According to report, some users received this error while deleting a specific file or folder. In this case, you might be able to fix the system cannot find the file specified error by using WinRAR.

Right-click the problematic file, and choose the Add to archive option from the menu.

Check Delete files after archiving and then click the OK button.

Now, you can delete the archive to completely remove the file without any difficulty.

Solution 11. Delete ProfileImagePath Key

While using Windows Backup to create your backup files, you can delete certain values from your registry to fix the system cannot find the file specified error.

Conclusion

Are you still worrying about how to fix the system cannot find the file specified error in Windows 10? Now, try the above methods, you can fix this error easily.

If you happen to know other ways to do this, don’t hesitate to let us know and we promise we’ll update this guide.

ABOUT THE AUTHOR

Position: Columnist

It’s going to be 6 years since Bella came to MiniTool family. She has been writing tech articles for many years. Her special focuses are video editing tips, change video format, data recovery, and manage partitions. She loves to travel and likes to try all new things.

Источник

How to Fix the System Cannot Find the File Specified

Quick fix: Use SFC to fix the system cannot find the file specified error

In Command Prompt, type the following command: sfc /scannow. Now press Enter.

After scanning and correcting errors, restart the computer and check if «the system cannot find the file specified» error is fixed.

«The system cannot find the file specified»

«The system cannot find the file specified» is an error that may happen on Windows 10 or earlier versions and usually indicates anВ Error Code 0x80070002. The error may also occur under various conditions, but most people receive this prompt when they:

How to Fix «The system cannot find the file specified»

Depending on your situation, the solutions to the problem «The system cannot find the file specified» vary. Identify your situation and find the corresponding solutions below.

Situation 1. Receive «The system cannot find the file specified» While Accessing a Hard Drive

As you know, most people encounter «the system cannot find the file specified» error when trying to access or back up some data. This is because the file system of the target device is corrupted or damaged, making your hard drive, USB or external hard drive inaccessible. To fix this error, you need to run the chkdsk command to repair the corrupted file system, using reliable data recovery software to bring all lost data back. Then, clean and re-partition the hard drive using the diskpart command in CMD.В

First. Run CHKDSK Command to Fix «System Cannot Find File Specified» Device

After this, you can try to re-open the drive to find your saved files. If files are missing or not showing up, move to the next tutorial to recover data from your storage device using reliable data recovery software

Next. Recover Data from Problematic Hard Drive or Device

Whether it’s an external storage device or local hard drive, you can use EaseUS Data Recovery Wizard to recover data from the device. It is able to retrieve deleted/formatted/lost files and get back data from formatted or inaccessible hard drives. To regain access to your precious files:

Last. Fix the Hard Drive via Disk Clean Diskpart

Now that you have kept your files safe, but the device is still not accessible, you can follow the steps below to fix the device without any worries.

Step 1. Run Command Prompt as an administrator.

Step 2. Enter diskpart and click «Yes» to allow this app to make changes on the computer.

Step 3. Enter the following commands one by one:

Step 4. If you have successfully cleaned your disk, enter the following commands in order:

If the process goes smoothly, you are now able to access your hard drive or USB drive and use it for data storage again.

Situation 2. Get the Prompt «The system cannot find the file specified» While Accessing Files/Folders

It also happens that you will see the error message when you try to open a folder or file by double-clicking it. There are three solutions to this situation.

Method 1. Check the System Log File

Step 1. Navigate to theВ C:/Windows/infВ directory and open Inf folder.

Step 2. Locate the setupapi.dev or setupapi.dev.log file and open it.

Step 3. Press «Ctrl + F» hotkey and type cannot find the file in the search.

Step 4. Press «Enter» to run the search. You should get the missing file.

Step 5. Copy and paste it into the Windows/inf folder.

Step 6. Reinstall the hard disk driver and reboot the system.

Method 2. Look for Files via Regedit

Step 1. Press «Windows + R» and enter regedit.В If there is a prompt asking for permission, click «Yes».

Step 2. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion and check if there is «RunOnce». If not, add it manually.

Step 3. Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion and check whether there is «RunOnce». If not, create it manually.

Step 4. Quit Registry Edit, restart your computer and install hard disk drivers again.

Method 3.В Check for RTHDCPL in Registry Key

Step 1. Press «Windows + R» and enterВ regedit.В If there is a prompt asking for permission, click «Yes».

Step 2. Go to HKLM\Software\Microsoft\Windows\CurrentVersion\Run\ and look forВ RTHDCPL. If it doesn’t exist, check for «Run» property and set the Admin-user permission as «Full Control», press «OK» to continue.

Be careful not to delete content from your registry since it may result in serious issues on your computer.

Situation 3. See the Prompt Saying «The system cannot find the file specified» While Launching Programs

This one seems to occur frequently among users. Apply one of the three methods below to have a try.

Method 1. Update your hard disk driver

Step 1. Go to «This PC» > «Manage» > «Device Manager».

Step 2. Expand «Disk drives»

Step 3. Right-click the disk and choose «Update driver»

Method 2. Reinstall the Program

Step 1. Quit the program.

Step 2. Reinstall your program

Step 3. Restart your computer.

Method 3. End nginx.exe Process

You may feel unfamiliar with nginx.exe, which is an essential Windows process. The notification of «The system cannot find the find specified» error may result from the fact that the Windows OS starts or restart the nginx.exe abnormally. To fix it:

Step 1. Right-click on your taskbar and choose «Task Manager».

Step 2. Under the Processes tab, select nginx.exe, and then choose «End Task»

Step 3. Download nginx.exe again and restart it.

Situation 4.В Receive «The system cannot find the file specified» While Installing Drivers

If you receive the notification while installing a driver on your PC, you can try method 2 or method 3 in Situation 2 to get rid of the «The system cannot find the file specified» error.

Situation 5. Get the Error Message «The system cannot find the file specified» While Backing Up System

If your condition fits this situation, you have several options to try. In addition to trying method 3 in Situation 3, you can also try the two tips detailed below.

Method 1. Install Windows updates

If you haven’t updated Windows for a long time, “The system cannot find the file specified” error is a sign that it’s about time to install all pending updates. For this purpose, you have to:

Step 1. Press «Windows + I»В keys and select Update & Security.

Step 2. Click «Check for Updates» and wait.

Step 3. When the list of available updates is revealed, install all of them.

Step 4. Repeat the same procedure several times to ensure that all needed updates have been installed.

Step 5. Don’t forget to restart the system to finish the installation of updates.

If you find files are missing after Windows update, you can restore the files with the help of EaseUS’s data recovery freeware. This free tool allows you to recover lost files in Windows 10, 8 or 7, etc., due to the system upgrade, system crash, careless deleting or virus attacking within three simple steps.

Method 2. Check Services Settings

Step 1. Go to the Start menu and type services.

Step 2. Go to «Background Intelligent Transfer Services», right-click it and set the «Startup type» to «Automatic» or «Automatic (Delayed Start)», then click «Start».

Step 3. Go back to find «Cryptographic Services» and «Windows Update», then set their «Startup type» to «Automatic», too.

Step 4. Don’t forget to click «Start» to initiate the service and click «Apply» > «OK».

The Bottom Line

Since the error message «The system cannot find the file specified» may appear in many situations, it’s almost impossible to include all the solutions in one article. Thus, we have presented you with four commonest situations and the most effective fixes for them. Hope one of the tips above can fix «The system cannot find the file specified» for you successfully.

Источник

«The system cannot find the file specified» error message on a Windows Server 2008 R2-based file server if the remote index server has a catalog that has a credential-enabled UNC path

Symptoms

Consider the following scenario:

You enable the Indexing Service role service on two file servers (Server A and Server B) that are running Windows Server 2008 R2.

You create an index catalog on Server A, and then add a UNC path into the index catalog.

You configure the credential that is needed to access the UNC path.

On Server B, you create an IAdminIndexServer object to access Server A. For example, you run the following Microsoft Visual Basic script:set objAdminIS = CreateObject(«Microsoft.ISAdm») objAdminIS.MachineName = «[Server A]» msgbox objAdminIS.MachineName

In this scenario, you receive the following error message:

The system cannot find the file specified

Note This error message indicates that the IAdminIndexServer object cannot access the indexing services on Server A correctly.

Resolution

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a «Hotfix download available» section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:

http://support.microsoft.com/contactus/?ws=supportNote The «Hotfix download available» form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must be running Windows Server 2008 R2 Service Pack 1 (SP1). Additionally, you must install the File Services server role and enable the Indexing Service role service.

For more information about how to obtain a Windows 7 or Windows Server 2008 R2 service pack, click the following article number to view the article in the Microsoft Knowledge Base:

976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2

Registry information

To apply the hotfix in this package, you do not have to make any changes to the registry.

Restart requirement

You do not have to restart the computer after you apply this hotfix. To avoid restarting, stop the Indexing Service role service.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

File information

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.

Windows Server 2008 R2 file information notes

The files that apply to a specific product, milestone (RTM, SP n), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:

Windows Server 2008 R2

Windows Server 2008 R2

GDR service branches contain only those fixes that are widely released to address widespread, extremely important issues. LDR service branches contain hotfixes in addition to widely released fixes.

The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the «Additional file information for Windows Server 2008 R2» section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are extremely important to maintain the state of the updated components. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.

Источник