The virtual printing feature is globally disabled on this system что это

Enable and Configure VMware Virtual Printing

Printing a document is common for almost every home or business user in nowadays. If you are working on a VMware virtual machine, you don’t need to do anything special to print a document. VMware Workstation and VMware Workstation Player allow you to print from a virtual machine to any printer available to the host computer. This is done through the VMware virtual printing feature. However, for the proper functioning, VMware Tools should be installed on the virtual machine from which you want to print documents.

In order to enable printing for the VMware virtual machines, you need to ensure that the virtual printing feature is enabled and configured. In this post, we will explain how to enable virtual printing for VMware virtual machines.

To configure virtual printing, first, you need to enable the virtual printing feature. Depending on the VMware platform you are using (VMware Workstation or VMware Workstation Player), use either of the following tasks:

Enable VMware Virtual Printing on VMware Player

Note: In order to enable the virtual printing feature, make sure that the VMware Tools are installed on the virtual machine.

Enable VMware Virtual Printing for VMware Workstation

To enable virtual printing for the virtual machine running on VMware Workstation, you need to perform the following steps:

Adding a New Printer to VMware Virtual Machine

To add a new printer to the VMware Virtual Machine, you need to perform the following steps:

That’s all you need to do to enable virtual printing in VMware virtual machine. Please drop your queries and suggestions in the comment box to improve the quality of the article. Please do share the article.

Источник

Русские Блоги

Ubuntu 18.04 Обновление VMware Workstation 15 не может войти в систему, и SMBus Host Controller не включен

В последнее время Ubuntu 18.04 продолжает напоминать мне об обновлениях, так что я не могу не поправить dist-upgrade. Но когда я снова открыл Ubuntu с виртуальной машиной, я обнаружил, что больше не могу получить доступ к странице входа. В процессе я столкнулся с тремя проблемами

1.VMware the virtual printing feature is globally disabled on this system

2. После завершения полосы прокрутки запуска Ubuntu страница входа отсутствует, и я не могу войти в Ubuntu

3.piix4_smbus smbus host controller not enabled

Детали этих трех проблем и их решения следующие:

После завершения полосы прокрутки запуска Ubuntu появляется сообщение об ошибке

1.VMware the virtual printing feature is globally disabled on this system

После моего различного Baidu я наконец нашел ответ:

Нажмите Player-> File-> Preferences, как показано ниже:

Включить виртуальные принтеры в разделе «Устройства» в разделе «Предпочтения» не отмечено. Нажмите «Изменить настройки» ниже и установите флажок «Включить виртуальные принтеры», как показано на рисунке ниже.

Нажмите OK, чтобы закрыть окно. Выключение виртуальной машины и последующее включение Ubuntu не имели этой проблемы, но появились две другие проблемы.

2. После завершения полосы прокрутки запуска Ubuntu страница входа отсутствует, и я не могу войти в Ubuntu

После того, как полоса прокрутки для запуска Ubuntu заканчивается,

Тогда весь экран выглядит так, без страницы входа.

Шаги решения для проблемы 2 следующие:

Шаг 1. Когда вы запускаете Ubuntu, нажмите и удерживайте левую клавишу Shift (если она не вступает в силу, вы можете попробовать длительно нажать левую клавишу Shift, удерживая нажатой левую кнопку мыши, щелкнув левой кнопкой мыши, удерживая клавишу Shift), затем система отобразит параметры загрузки GRUB.

шаг 2. Выберите дополнительные параметры для Ubuntu

шаг 3. Затем войдите в режим восстановления Ubuntu (Ubuntu, с Linux 4.7.x.x-generic (режим восстановления))

шаг 4. Выберите root в меню Recovery, чтобы войти в корневую оболочку

Шаг 5. Введите в командной строке

Затем измените файл на

Затем нажмите Ctrl + O, чтобы сохранить изменения, нажмите Ctrl + X, чтобы выйти, затем вернитесь в командную строку и введите перезагрузку. Найден после перезагрузки, хотя это все еще показываетpiix4_smbus Хост-контроллер smbus не включен, но обычный пользовательский интерфейс входа появится немедленно, и вы можете войти в Ubuntu в обычном режиме.

3.piix4_smbus smbus host controller not enabled

Пока что мы решили первые две проблемы и можем войти в систему в обычном режиме. В ссылочной ссылке на вопрос 2 владелец также упомянул шаги решения вопроса 3. Конкретные шаги заключаются в следующем:

Шаг 1. Введите vi /etc/modprobe.d/blacklist.conf в командной строке

Введите в последнюю строку: черный список i2c-piix4

Сохраните и выйдите (нажмите esc и введите: wq).

Шаг 2. Восстановите загрузочный файл. Если эта операция не выполнена, об ошибке все равно будет сообщено после перезапуска

До сих пор мы успешно решили эти три задачи и можем снова поиграть.

Источник

virtual device ‘serial0’ will start disconnected. on VMware Workstation Pro

Whenever a virtual machine starts on VMware Workstation Pro, there is a message pops up:

The virtual printing feature is globally disabled on this system, and will not be enabled for…

Virtual ‘serial0’ will start disconnected.

If you see this kind of warning or message, first of all, you will need to go to the VMware Workstation. When you are in the VMware Workstation, you will have to navigate to Edit > Preferences > Devices and then check Enable virtual printers option. In case you do not actually have any need to print from virtual machines, you can right click on every VM then go too Settings > Printer and uncheck Connect at power on option.

VMware Workstation Pro is known as the top product for running more than one operating system as virtual machines or VMs on a single Linux or Windows PC. Everyone relies of Workstation Pro, including IT professionals, developers and business who build, test or demo software for any device, platform or cloud.

VMware Workstation Pro is the best tool for modern developers and IT professionals. This one allows you to run multiple virtual machines, Kubernetes clusters, and OCI containers at the same time on the same Linux PC or Windows. It was created with the features and is securely isolated Windows VMs and Linux and the other desktop, server, and cloud environments, as well as the configurable virtual networking and network condition simulation that can be used in the code development, application testing, solution architecting, product demonstrations, and so on.

A ton of operating systems are supported by VMware Workstation Pro to run and build apps of any type and now has added support to Run, Build, Push, and Pull OCI containers. It is also able to make Kubernetes clusters with kind and Minikube, as well as giving the tools that can be used to deploy the Kubernetes the hard way. The thing called VMware Workstation Pro is an important part of the development and testing cycle by giving the apps with production like environment, release the great code on time, and helping experts to find bugs early.

VMware Workstation Pro is securely linked to the vSphere via vCenter Server or ESXi hosts so it can be used to launch, manage, and control both VMs or virtual machines and physical hosts. A normal VMware hypervisor is so good at productivity and enables easy transfer of VMs to and from the local computer. Aside from that, it also allows to deploy the whole VMware Cloud Foundation environments locally, and is best to test the next big thing.

VMware Workstation Pro has secure and isolated environments. It can run a secure second desktop with some different privacy settings, networking configurations, tools, or use forensic tools to investigate OS vulnerabilities. It provides one of the most secure hypervisors in its field and gives helpful features for a lot of people, including IT security professionals, including the ability to sniff virtual network traffic and output it into the standard PCAP format.

Features of VMware Workstation Pro:

General Host OS Requirements:

Keep in mind that Windows 7 hosts are no longer supported, meaning the Workstation 16 will not work on them.

Workstation Pro Installation:

VMware Workstation 16 supports a lot of 32-bit and 64-bit guest operating systems, including:

For Hyper-V Enabled Hosts:

Host Operating Systems:

For 3D Hardware Accelerated Graphics Support:

As the exception, these CPUs below are not supported:

AUTHOR BIO

On my daily job, I am a software engineer, programmer & computer technician. My passion is assembling PC hardware, studying Operating System and all things related to computers technology. I also love to make short films for YouTube as a producer. More at about me…

Источник

The virtual printing feature is globally disabled on this system что это

I have setup a new Windows 7 Ultimate and a new Guest Windows 7 Ultimate, both inclusive all updates and VMWare Tools installed.

When starting the Guest OS I see the following error message:

No 3D support is available from the host. The 3D features of the virtual machine will be disabled.

dxdiag on the host shows:

Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.151019-1254)

Language: English (Regional Setting: English)

System Manufacturer: System manufacturer

System Model: System Product Name

BIOS: BIOS Date: 10/31/12 20:41:07 Ver: 36.02

Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (8 CPUs),

Memory: 24576MB RAM

Available OS Memory: 24544MB RAM

Page File: 3643MB used, 45441MB available

Windows Dir: C:\Windows

DirectX Version: DirectX 11

DX Setup Parameters: Not found

User DPI Setting: Using System DPI

System DPI Setting: 96 DPI (100 percent)

DWM DPI Scaling: Disabled

DxDiag Version: 6.01.7601.17514 32bit Unicode

I have an NVidia GTX-275, DirectX 10 compliant. With latest drivers.

Dedicated Memory: 869 MB

Driver File Version: 9.18.0013.4192 (English)

Driver Attributes: Final Retail

Driver Date/Size: 10/13/2015 20:00:02, 17559432 bytes

Driver Strong Name: oem31.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section002:9.18.13.4192:pci\ven_10de&dev_05e6

Directory of C:\Windows\System32

05.12.2015 15:22 1,238,528 d3d10.dll

05.12.2015 15:22 296,960 d3d10core.dll

05.12.2015 15:22 648,192 d3d10level9.dll

30.07.2015 19:06 2,565,120 d3d10warp.dll

05.12.2015 15:22 194,560 d3d10_1.dll

05.12.2015 15:22 333,312 d3d10_1core.dll

05.12.2015 15:21 1,887,232 d3d11.dll

14.07.2009 02:40 12,288 d3d8thk.dll

21.11.2010 04:24 2,067,456 d3d9.dll

26.05.2010 11:41 511,328 d3dx10_43.dll

26.05.2010 11:41 276,832 d3dx11_43.dll

26.05.2010 11:41 2,401,112 D3DX9_43.dll

Directory of C:\Windows\SysWOW64

05.12.2015 15:22 1,080,832 d3d10.dll

05.12.2015 15:22 220,160 d3d10core.dll

05.12.2015 15:22 604,160 d3d10level9.dll

30.07.2015 18:57 1,987,584 d3d10warp.dll

05.12.2015 15:22 161,792 d3d10_1.dll

05.12.2015 15:22 249,856 d3d10_1core.dll

05.12.2015 15:21 1,505,280 d3d11.dll

14.07.2009 02:15 1,036,800 d3d8.dll

14.07.2009 02:15 11,264 d3d8thk.dll

21.11.2010 04:24 1,828,352 d3d9.dll

14.07.2009 02:15 386,048 d3dim.dll

14.07.2009 02:15 817,664 d3dim700.dll

14.07.2009 02:15 593,920 d3dramp.dll

26.05.2010 11:41 470,880 d3dx10_43.dll

26.05.2010 11:41 248,672 d3dx11_43.dll

26.05.2010 11:41 1,998,168 D3DX9_43.dll

14.07.2009 02:15 53,760 d3dxof.dll

I searched for tips, but didn’t found any.

What is a possible cause, that I don’t have 3D support in my Guest system?

Источник

The virtual printing feature is globally disabled on this system что это

Cannot connect the virtual device sata0:1 because no corresponding device is available on the host. The error pops up when I enable the host/guest share and map the drive.

I tried to delete and then add back the the sata drive to VM Player- but it did not help. I have installed VMware Tools.

I am using VM Player 12.5.5 on Win10 Pro Host, and Ubuntu 16.04 Desktop.

It seems like you are trying two different things at the same time:

The words «enable the host/guest share and map the drive» suggests you are trying to use the shared drive feature.

The words «add back the SATA drive to VM Player» suggests you added a physical drive to the VM configuration.

So is the disk that you added in the same drive that you wanted to share?

Suggest that you try only one of them.

1. I enabled and added a shared folder (not a drive) from my Windows10 host. This did not work and I am getting the stated error.

The title «Cannot connect the virtual device sata0:1» looks like has nothing to do with the shared folder problem you have.

Looking at your VM configuration screenshot, you have 2 SATA devices. CD/DVD is set to Autoconnect. Chances are sata0:1 is the virtual CD/DVD. You might have set to this to «Connect on Power On» and there is no CD/DVD drive present in your host computer.

Let resolve the problem of «Cannot connect the virtual device sata0:1» first.

As to the shared settings disabled, I seem to be able to see it disabled when the VM was booting up. Otherwise when it is up and running or shut down, it is editable.

1. I do not have any CD/DVD on my system

3. The screen shots I have provided are of my VM when Not running.

Last but not the least:

1. My share actually works fine- so that is not an issue.

Источник