Unable to write to this disk in drive что делать
Solved: Hard Disk Serial Number Changer Unable to Write to This Disk in Drive
If you meet the “Unable to Write to This Disk in Drive” error in Hard Disk Serial Number Changer, you can try the following methods to solve this problem effectively.
By Emily 
/ Last Updated September 25, 2021
When need to use Hard Disk Serial Number Changer?
A hard disk will be assigned a new disk serial number whenever you format a hard drive. This serial number is used by software programs installed on the computer to identify the disk driver and prevent multiple activations of the same software on other computers. However, if you replace your old hard drive with a new one, a different serial number may create with software association.
To avoid software association issues, you can change the new drive’s serial number to match your old hard drive. But the serial number is created during the format. That means you have to reformat the hard drive to change its serial number. And formatting will delete everything on the disk. Then, you can use «Hard Disk Serial Number Changer». This program allows you to change the hard disk serial number without reformatting it.
Hard Disk Serial Number Changer unable to write to disk device
The name (Hard Disk Serial Number Changer) may be a bit misleading. It doesn’t actually change the hard disk serial number but the volume serial number. Below is how to use this program to change disk volume serial number (Volume ID).
Step 2. Right click at HardDiskSerialNumberChanger.exe and select “Run as Administrator”.
Step 3. Click “Yes” on the UAC (User Account Control) warning message window.
Step 4. Choose the disk volume you want to change, type the new serial number (XXXX-XXXX) and press “Change”.
Step 5. Click “Yes” and reboot your computer.
From above, we can see the process is quite straightforward, but sometimes you might receive an error message saying “unable to write to disk device”.
How to solve this problem easily?
To solve this problem, you need to ensure that you have launched this program as an administrator. Besides, some users also reported the following two disadvantages of Hard Disk Serial Number Changer:
1. It does not work on Windows 8 and Window 10.
2. It works on most hard drive with FAT/FAT32/NTFS format but unfortunately, it won’t work on the new exFAT format volume.
Therefore, you can also check whether you have used this program to change the volume serial number in Windows 10 or Windows 8, or you are trying to change the serial number of exFAT drive.
Alternative to Hard Disk Serial Number Changer
Since the Hard Disk Serial Number changer does not work or pops out “unable to write to this disk in drive” in some cases, many users are searching for a Hard Disk Serial Number Changer to change hard drive serial number more easily. If you are one of them, we recommend you using AOMEI Partition Assistant Professional.
This software is more compatible than Hard Disk Serial Number, and it supports 32-bit and 64-bit of Windows 11/10/8/7 and Windows XP/Vista. More importantly, it can change FAT32, NTFS and exFAT volume serial number without reformatting hard drive.
Step 1. Install and run AOMEI Partition Assistant Professional on your Windows Computer. Right click the target volume and select “Advanced” > “Change Serial Number”.
Step 2. In the pop-out small window, you can input a set of new serial number for the selected partition, and click “OK”.
Step 3. Then, click “Apply” and “Proceed” to commit the pending operation.
See? Within simple 3 steps, you can change hard disk volume serial number without any hassle.
Final words
In this article, we have discussed how to solve “Hard Disk Serial Number Changer unable to write to this disk in drive”, and shared a great Hard Disk Serial Number Changer alternative.
What’s more, AOMEI Partition Assistant Professional comes with other functions to help manage your hard disk better and more conveniently. For example, it can clone system disk to SSD with secure boot, convert disk to MBR or GPT partition style without deleting partitions, extend NTFS system drive without rebooting PC. If you are running Windows Server operating system, please try AOMEI Partition Assistant Server.
Unable to write to disk in drive C:
This is just one of the various errors I am getting on one of my PC’s, others include:
Hard disk error which takes me to system configuration, it then says that i have no hard disk installed.
No Operating system found.
When i do get windows to start, it says i have a disk space issue on disk c then it comes up with a blue screen saying a fatal exception 0E has occured at 0167:BFF9DFFF and then says cannot write to disk in drive c:
Anybody know what could be wrong?
Comments
There’s 2 things I can think of, but both are bad.
1) You’ve got a virus (if you’ve created a rescue disk set use those to check your hard drive)
2) Your hard disk has failed or failing. (in which case you’ll need a new 1)
Ho right. That’s why their facing a class action in the states then is it. Bunch of tossers. grrrrrrr.
Some of the stuff Iv’e read from the Register and the inquirer about the whole sorry Fujitsu HDD thing is. Well. Nothing short of unbelivable. They really are trying to keep a lid on it.
You know,I brought my drive in september of 2001.
It packed up about june of 2002.It was august of last year that I started hearing things about the fujitsu drives,
But I lost the receipt and I didn’t find it till december of last year, when I was cleaning out a cupboard.They shortend their warrenty’s to about a Year then.Funny that, ain’t it.
By then the warrenty had run out, Which is a bit of a sh*t.
I doubt I could still pursue it now. 
I went back to maxtor after the fujitsu went down the toilet.
Fujitsu along with IBM/ *Hitachi*( who have just brought IBM’s HDD division lock stock and barrel.).Are two HDD makers you wouldn’t catch me buying from.
Out of interest, Is their anyone else here who has owned one of these HDD’s.
Originally posted by paul shuff
Ho right. That’s why their facing a class action in the states then is it. Bunch of tossers. grrrrrrr.
Some of the stuff Iv’e read from the Register and the inquirer about the whole sorry Fujitsu HDD thing is. Well. Nothing short of unbelivable. They really are trying to keep a lid on it.
You know,I brought my drive in september of 2001.
It packed up about june of 2002.It was august of last year that I started hearing things about the fujitsu drives,
But I lost the receipt and I didn’t find it till december of last year, when I was cleaning out a cupboard.They shortend their warrenty’s to about a Year then.Funny that, ain’t it.
By then the warrenty had run out, Which is a bit of a sh*t.
I doubt I could still pursue it now.
Originally posted by paul shuff
Fujitsu along with IBM/ *Hitachi*( who have just brought IBM’s HDD division lock stock and barrel.).Are two HDD makers you wouldn’t catch me buying from.
Out of interest, Is their anyone else here who has owned one of these HDD’s.
The IBM Dara in my laptop runs fine. It’s 3.25 years old now.
Sound advice their gents.Thanks a lot.! 
Anyway he said that it’s now up to fujitsu to see what they can do for me.He did say though that he’d support any claim against fujitsu and give me a pro-froma invoice if required.(I think that’s what he said?.)
Time to give fujitsu a ring.
Trouble is. That i really don’t fancy having another HDD from them if the replace the bloody thing.
I mean,If they can treat their costomers with this much contempt,What’s stopping them from doing it again in the future.
Originally posted by jratkinson
The IBM Dara in my laptop runs fine. It’s 3.25 years old now.
Maybe it does,But i think it’s the infamous IBM GXP(GXP, Is that it??) range that turned to sh*t.
I know of someone who had one on another board,And it did give up after 11 months.
He though it was his fault that it went down the toilet.
But we then started hearing about high failiure rates with these drives.That’s when we cottoned on.
Originally posted by paul shuff
Maybe it does,But i think it’s the infamous IBM GXP(GXP, Is that it??) range that turned to sh*t.
I know of someone who had one on another board,And it did give up after 11 months.
He though it was his fault that it went down the toilet.
But we then started hearing about high failiure rates with these drives.That’s when we cottoned on.
I’ve heard that some IBM drives are carp. Mine came with a Dell laptop bought off the shelf.
I try and back up fully all the time with the assumption that the hard drive could go t*ts up at any time, regardless of make.
For all those who who own Fujistu harddrives with the model no MPG3xxx that have failed, Fujitsu will replace them with a bit of effort.
I got mine in October 2000, it failed around June 2002 (obviously out of warranty) and I phoned them but they said it was out of warranty. Called them up November last year, after reading all the reports, and they said to send the old one back and they’ll replace it! Was hoping for a bigger drive but they replaced it with newer 30gig.
Bit of persistence is required but they will hopefully give in in the end. Even though it was out of warranty, it was still a known fault (due to faulty Cirrus Logic controller chips) and therefore a manufactuing defect and not normal wear and tear. They should replace it no matter how old it is (within reason anyway!).
As for the IBM drives, the 75GXP series were faulty, the others should be fine.
My concern was what they do to the old drives? mine is full of customers names and addresses and some other financial data. I can’t boot up the disc to delete it.. the drive is well and truly buggered. I emailed The Register asking them if they had any ideas about the security issues with sending back duff Fuji drives, they asked Fuji but I never read any more on the subject.
I can imaging that all the duff drives might be scrapped or possibly sold on to a scrap dealer, who might repair some of the drives. then what might happen to any recovered data.
Yeah. scary prospect that one.
So Orbitalzone,Did you have one these drives and not send it back. That’s how it sounds. Righty.Instead of giving fujitsu a ring.I e-mailed them with this e-mail.:-
Hello!
On the 19th of september 2001.I purchased a a 20Gb fujitsu HDD.
In june of 2002.The said drive failed.I booted into dos and checked it through fdisk and various other means, But it was as dead as a doornail.
I couldn’t find the receipt at the time because we moved house in January 2002 and it wasn’t until December of last year, after cleaning a cupboard out, that I found it.
Iv’e contacted the retailer.But he said it was no longer his responsibility as the 12 month warrenty period was over on his part.!
I wanted to know if the drive can still be replaced by you (fujitsu).
Iv’e read about the high failiure rates of these drives.
So I feel that it is down to fugitsu in some part.
Hope you can help me.
Many thanks Paul
So i waited and about an hour after I e-mailed fujitsu,I got a reply. Here goes the first part.:- Dear Paul,
I enclose full details explaining our Warranty terms/conditions along with the
Customer Services Policy statement for your information.
(See attached file: Customer Letter (Support).doc)
Please feel free to contact our Warranty Service Centre based at our main office
in the UK providing full details to the administration department including the
model, part nos. serial nos. date of manufacture and a valid proof of purchase
on Fax: +44 (0)20 8606 4532/Tel: +44 (0)20 8848 5180 as they will decide and
investigate your claim further.
The other part of the e-mail was warrenty details on an attatchment. here goes :-
Thank you for your enquiry. You may have read recent press articles about a recall of Fujitsu desktop hard disk drives. All the articles we have seen to date are inaccurate, Fujitsu has made no such announcement, and there is no recall of these or any other disk drives from Fujitsu.
If you have a drive that has failed and wish to return it then the following guideline should help you. Should you have any further concerns or enquiries then please do not hesitate to contact us.
The Warranty on Hard Disk products is solely provided to the direct customer of Fujitsu Europe Ltd. Therefore the following rules apply.
If you have purchased your Hard Disk product from a PC vendor, either directly from the manufacturer or a retailer, your warranty is supported by this supplier. Typically this is for 12 months, however you may have purchased extended warranty, in which case, please return to your place of purchase for warranty support.
If you have purchased your Hard Disk product from a Fujitsu approved dealer or distributor, your warranty will be provided by that company. If however, they have ceased trading, your warranty may be supported by Fujitsu Europe Ltd directly. A copy of proof of purchase to our Warranty Service department would be required before your Warranty condition is validated.
We have experienced many problems with customers being sold defective product from Computer Fairs, and we do not approve this sales channel for our products. We do accept however that some legitimate suppliers sometimes chose to sell products in this way, in which case you should contact your supplier for warranty issues. Fujitsu Europe Ltd does not accept any direct claims for warranty for products purchased via this supply route
Should you feel you still have a valid Warranty claim based our Warranty Policy information provided above, please send a fax to Warranty Request on 020 86064532 providing the following information in both instances :
Drive Model Number:
Drive Part Number:
Drive Serial Number:
Date of Manufacture
Copy of Proof of Purchase
Explanatory letter of place, conditions of purchase and nature of fault
Assuring you of our best attention.
On behalf of Fujitsu Europe Ltd
Nice automated response their.
Now this throws me a new dilema.With this quote..
I don’t know weather to tell them that I brought it from a computer fair, As the retailer runs a mail order service over the web.He was none the wiser for this though. Now what.
And just what the hell are they on about, when they say about the recall. I never said anything about a recall. ggrrrr
[SOLVED] Floppy Drive Error: Unable to write to disk in drive A
zarniro
I receive the following error whenever writing multiple or large files to my floppy disk:
Disk Write Error
Unable to write to disk in drive A:
Data or files may be lost
It occurs about every 5 seconds when writing files. Some files, typically small ones, are written with no problems.
I’ve replaced the floppy drive with a new one and the problem remains.
I swapped in a known working floppy and cable from another working PC and experienced the same problem.
Please suggest a solution.
ilusha2
1. What about your Hard Drive?, it could be messed up. Do you only copy from you HD or does this problem also happen when copying from a CD-ROM?
2. Try copying a small enough file so that it will fit on your floppy from a CD-ROM, and see what happens. Since you have replaced the floppy drive, the floppy disk, AND the cable, I guess it isn’t the floppy, it must be something else.
4. When did this start happening? Did you add/replace hardware right before this happened? Did you install any new software?
zarniro
I had this problem when I bought the PC. A replacement floppy drive fixed it then. This round of problems started about 6 months ago. At the time, I considered recently installed hardware and software but there was none. I replaced the floppy in July hoping a new drive would fix it. It did not.
Not only did a working floppy drive and cable from another PC not work in my PC, but my floppy drive and cable did work in the other PC.
I tried copying files from a CD as you suggested. I had the same problem. I tried again to copy about a dozen files from the hard drive and had the problem. However, most of the files «appeared» to be copied and I noticed that the counter on the copying files screen seemed to indicate 5 seconds had expired every time after I clicked off the blue write error screen.
Device Manager says the drive is ok, and the floppy disks I’m using are new.
ilusha2
And like I asked in my last message, when did you last defrag and how many programs do you have running when you’re copying the files?
zarniro
I defragged two weeks ago and do so monthly.
Typically, the only thing I have running is Norton AntiVirus, Windows Explorer and whatever normally starts up with Windows 98 SE (loadqm and systray).
As for my computer, its a MICRON Pentium 1 with 150 Mhz processor. Other details include:
Microsoft Windows 98 4.10.2222 A
Upgrade using CD /SrcDir=D:\WIN98 /IQ /U:xxxxxxxxxxxxxxxxx
IE 5 6.0.2800.1106
Uptime: 0:00:26:45
Normal mode
GenuineIntel Pentium(r) Processor
48MB RAM
66% system resources free
Windows-managed swap file on drive C (13903MB free)
Available space on drive C: 13903MB of 19553MB (FAT32)
Available space on drive D: 1280MB of 1546MB (FAT32)
Phoenix BIOS M54Hi
I haven’t been able to find the motherboard manufacturer yet, but I am still looking.
ilusha2
Retired Administrator
I don’t think it’s an IRQ issue here.
What happens if you try to copy files in safe mode?
ilusha2
zarniro
The following is from MICRSOFT SYSTEM INFORMATION
0 System timer
1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 Communications Port (COM2)
4 Communications Port (COM1)
5 Creative Sound Blaster 16 or AWE-32
6 Standard Floppy Disk Controller
7 Printer Port (LPT1)
8 System CMOS/real time clock
9 CMD USB Open Host Controller
9 IRQ Holder for PCI Steering
10 Future Domain TMC-1650/1660/1670/1680 SCSI Host Adapter
11 S3 Trio64V+ PCI (765)
11 IRQ Holder for PCI Steering
12 PS/2 Compatible Mouse Port
13 Numeric data processor
14 Primary Ultra ATA controller
14 Intel 82371FB PCI Bus Master IDE Controller
15 SupraMax 56i Voice PCI
15 SUP2750 PCI Modem Enumerator
15 IRQ Holder for PCI Steering
Future Domain TMC-1650/1660/1670/1680 SCSI Host Adapter
SCSIAdapter
Alloc resources: Logical Configuration 0
IRQ: 10 Mask: x0000
IO Range: Base=x0160 End=x016F Alias=x00, Decode=xFF
Driver: FD16_700.MPD 4/23/1999 10:22 PM Size: 10528
Iomega Parallel Port Interface
SCSIAdapter
This Device Has a Problem: Code=10 (0xA)
This device is not present, not working properly, or does not have all the
drivers installed. See your hardware documentation.
Alloc resources: None
Driver: PPA3.MPD 5/26/1999 3:14 PM Size: 56832
Standard Floppy Disk Controller
fdc
Alloc resources: Logical Configuration 0
IRQ: 6 Mask: x0000
DMA: 2 Mask: x0000
IO Range: Base=x03F0 End=x03F5 Alias=x04, Decode=x03
Base=x03F7 End=x03F7 Alias=x04, Decode=x03
Driver: HSFLOP.pdr 4/23/1999 10:22 PM Size: 25741
GENERIC NEC FLOPPY DISK
DiskDrive
Alloc resources: None
Intel 82371FB PCI Bus Master IDE Controller
hdc
Alloc resources: Logical Configuration 0
IRQ: 14 Mask: x4000
IO Range: Base=x01F0 End=x01F7 Min=x01F0 Max=x01F7 Alias=x04, Decode=x03
Base=x03F6 End=x03F6 Min=x03F6 Max=x03F6 Alias=x04, Decode=x03
Base=xFBF0 End=xFBFF Min=x0000 Max=xFFFF Alias=xFF, Decode=x00
Primary Ultra ATA controller
hdc
This Device Has a Problem: Code=10 (0xA)
This device is not present, not working properly, or does not have all the
drivers installed. See your hardware documentation.
Alloc resources: Logical Configuration 0
IRQ: 14 Mask: x4000
IO Range: Base=x01F0 End=x01F7 Min=x01F0 Max=x01F7 Alias=x04, Decode=x03
Base=x03F6 End=x03F6 Min=x03F6 Max=x03F6 Alias=x04, Decode=x03
Base=xFBF0 End=xFBF7 Alias=xFF, Decode=x00
Driver: ESDI_506.pdr 4/23/1999 10:22 PM Size: 24406
intelata.mpd
Secondary Ultra ATA controller
hdc
This Device Has a Problem: Code=29 (0x1D)
This device has been disabled in the hardware. In order to use this device,
you must re-enable the hardware. See your hardware documentation for details.
Alloc resources: Logical Configuration 0
Driver: ESDI_506.pdr 4/23/1999 10:22 PM Size: 24406
intelata.mpd
PLEXTOR CD-ROM PX-40TS
CDROM
Alloc resources: None
The IOMEGA device problem listed above is from a zip drive someone recently (long after the problem began) loaned me to do a backup and is now disconnected. The ATA errors started 2 weeks back when I purchased (to do backups) and installed a CD R/W that I haven’t been able to get to work either.
These are the only devices showing problems in DEVICE MANAGER. Device Manager also indicates there are no problems with the floppy drive.
I haven’t tried the safe mode copy yet, but will tomorrow
Hard Disk Serial Number Changer
Whenever a hard drive is formatted in Windows a serial number is assigned to it in the end.
This serial number is often used by software applications to restrict software installations to that hard drive, or to reduce the number of allowed activations by applications by linking the serial number of the hard drive to one of the allowed activations.
This should not be confused with the hardware serial number that gets added to a hard disk during the manufacturing process.
Hard Disk Serial Number Changer
The Hard Disk Serial Number Changer application can change the serial number that gets assigned when a hard drive is formatted in Windows.
This can be really useful if an existing hard drive has to be formatted but you do not want to lose any activations or software that is linked to the serial of the drive. It can also come in handy if a new hard drive is added to a computer system to replace an older one especially if software needs to be transferred or reinstalled on the new hard drive.
The software program is portable and can therefore be executed directly after you have finished the download. The program provides access to all drive letters of connected hard drives and floppy drives, and their assigned serial numbers.
A click in the Serial Number text field enables you to edit the existing serial which is always in the format XXXX-XXXXÂ to another valid number in the same format. Note that only hex values are allowed which means numbers from 0 to 9 and letters from A to F.
Update : The program supports Fat, Fat32 and NTFS file systems only, and is fully compatible with all recent and not so recent Microsoft operating systems including Windows XP, Vista and Windows 7. Windows 8, while not mentioned on the program website, is compatible as well.
Please note that you may need to run the program with elevated privileges on Windows 7 and newer versions of Windows. To do that right-click the program in Windows Explorer and select the run as administrator option from the context menu.
It is recommended that you know what you are doing before you use the application. Changing the hard drive serial can have consequences in regards to the activation status of software installed on your system.
Update 2: The program homepage is no longer available. We have uploaded the latest release version of Hard Disk Serial Number Changer to our own server. Note that we don’t support it in any way. You can download it with a click on the following link: Hard Disk Serial Number Changer