Voicemeeter is already installed что делать
Cannot Re-install Voicemeeter?
K eep in mind: VOICEMEETER does not need to be removed from your computer in case of a problem. VOICEMEETER is a usual Windows application, endowed with an audio device driver. If you don’t use it, it will not affect your system nor causes problems.
There is also NO REASON to reset the Windows installation or create a restoration point. Basically, all is a question of the audio configuration in the Windows Control Panel / Sound Settings.
VOICEMEETER is installed on your system disk:
C:\Program Files (x86)\VB\Voicemeeter
Its virtual I/Os are installed in the system directory like any other audio driver.
Uninstall VOICEMEETER
Attention! After the deinstallation, you need to REBOOT Windows! Otherwise, a new VOICEMEETER installation will not work.
If the VOICEMEETER Setup Program does not allow the installation, the virtual audio device (or parts) are still installed or not completely de-installed.
In this case, you need to de-install the VOICEMEETER Virtual Audio Driver manually in the Windows Device Manager:
(1) Open the system / device manager
(2) Find any reference to the VOICEMEETER Audio Device and right click on it to de-install it.
(3) Check the Sound Video Game Controller section first, then the Audio Inputs and Outputs section.
(4) Reboot after each operation!
If the VOICEMEETER Setup program fails to complete its process (installation should take less than 3 minutes), you can go to the existing VOICEMEETER directory (C:Program Files (x86) VB Voicemeeter) and try to install or remove the VOICEMEETER virtual audio device using the VBCABLE_Setup programs – remember to REBOOT after each operation.
If nothing works and you still can’t install a new VOICEMEETER version, consider doing a system roll back (sytem restore) … from a recent point (some days ago).
VB-Audio’s Forums
VB-Audio’s Information and Discussions
Post by Vincent Burel » Sun Mar 06, 2016 10:05 am
Voicemeeter is installed in your system disk: C:\Program Files (x86)\VB\Voicemeeter directory
While it’s virtual I/O are installed in system directory like other audio driver.
if you made a desinstallation without REBOOT, re-installing Voicemeeter could not work anymore.
If Voicemeeter Setup Program does not propose you to install, it’s because virtual audio device (or part of them) are still installed or not completely de-installed. You need to de-install Voicemeeter Virtual Audio Driver manually by the Windows Procedure:
(1)- Go in system / device manager
(2)- Find any reference to Voicemeeter Audio Device and click on it to de-install it.
(3)- Check first in Sound Vido Game controller section, then afer check in audio inputs and outpus section.
(4)- Reboot after each operation.
REM: Start by uninstalling multimedia drivers (not audio I/O)
When the multimedia driver is not present anymore,
You might uninstall remaining Voicemeeter audio i/o if any
Reboot and Repeat the operation until having no more Voicemeeter audio component on your system.
if Voicemeeter Installer cannot finish its process (installation should be done in less than 3 minutes)
you can go in Voicemeeter directory (C: \Program Files (x86)\ VB \ Voicemeeter) and
try to use VBCABLE_Setup programs to install or remove Voicemeeter virtual audio device (REBOOT after each operation).
if nothing works and you still can’t install Voicemeeter again
as last option, consider making a system roll back (sytem restore). from a recent point (some days)
(if your system restore is activated of course).
Remove & Uninstall Voicemeeter 1.0.2.7 Completely from Windows
Do you have trouble in completely uninstalling Voicemeeter 1.0.2.7 from your system? Are you looking for an effective solution to thoroughly get rid of it off the computer? Do not worry! You came to the right place, and you will be able to uninstall Voicemeeter 1.0.2.7 without any difficulty.
Voicemeeter is a Virtual Mixing Console for Windows able to mix 3 audio inputs devices (2 physicals and 1 virtual) to 3 audio output devices (2 physicals and 1 virtual) through 2 Busses. In other words, Voicemeeter is a simple mixer allowing you to mix different audio sources, your microphone as well as computer sound and route the result to one or two physical audio outputs as well as to another audio application thanks to its virtual i/o.
However, many users have difficulties and problems away from the computer. Below we have listed possible problems when uninstalling Voicemeeter 1.0.2.7. If you also have this problem, you can find a useful solution for this.
It seems that there are many users who have difficulty in uninstalling software like Voicemeeter 1.0.2.7 from the system. And some of them get into trouble when uninstalling the software, and some of them can uninstall the software, but to get problems after removal. Some possible problems that people run into:
Causes of the above problems :
Manually Uninstall Voicemeeter 1.0.2.7 with Windows Add/Remove Programs.
Windows «Add/Remove Programs» offers users a way to uninstall the program, and each Operating system has a «Add/Remove programs» function.
Manually Uninstall Voicemeeter 1.0.2.7 with Build-in Uninstaller.
Most computer programs are installed with its build-in uninstaller that can also help uninstall the program.
To run its uninstaller, you can also
Please know that Windows «Add/Remove Programs» and its build-in uninstaller can remove only the main executable program files, but not all program files and components. Some invalid files can be left in the registry and folders. To completely uninstall Voicemeeter 1.0.2.7, you need to get rid of these remnants, otherwise, it will slow down your computer and block the installation of other incompatible programs.
To thoroughly delete its files, please follow the steps:
NOTE: We recommend only for advanced computer users, manually edit the registry and remove Voicemeeter because deleting any single registry error leads to a serious problem or even a system crash.
VB-Audio’s Forums
VB-Audio’s Information and Discussions
Voicemeeter does not uninstall.
Voicemeeter does not uninstall.
Post by turd_rotisserie » Sun Sep 30, 2018 9:42 pm
Voicemeeter keeps starting when l try to uninstall it from Control Panel, or tells me to wait for it to shut down before l press the button to uninstall it again, which in turn inevitably starts it up again.
I just want to uninstall it.
Re: Voicemeeter keeps starting when l try to uninstall it from Control Panel
Post by Vincent Burel » Tue Oct 02, 2018 9:29 am
Re: Voicemeeter keeps starting when l try to uninstall it from Control Panel
Post by turd_rotisserie » Wed Oct 10, 2018 9:11 am
I’ve already tried the suggestions in that topic.
I’ve tried all of the suggestions available.
There is no formal way to uninstall this program, because upon uninstall, Voicemeeter starts up.
There are many programs available to download, for example accountancy software and strange audio software.
One thing they have in common is that you can uninstall them, and if uninstall isn’t one-press via control panel, then you can ask the program directly to uninstall itself.
Yours is the one exception. It doesn’t uninstall. Why?
Re: Voicemeeter does not uninstall.
Post by Vincent Burel » Wed Oct 10, 2018 5:55 pm
again, the installer is checking if the voicemeeter virtual audio drivers (VAIO’s) are installed or not
if it remains some part of the voicemeeter virtual audio driver on the system, it will consider that voicemeeter is still installed.
so, go in device manager and de-install manually Voicemeeter virtual audio controller or I/O (there is categories of driver to check) and Reboot until having nothing there anymore.
REM: YOU GET THIS PROBLEM BECAUSE YOU FORGOT TO REBOOT after Installation or De-Installation.
Voicemeeter Banana позволяет вам управлять звуком вашего ПК с Windows для потоковой передачи
Управление звуком в Windows 10 может иногда становиться немного беспорядочным, особенно если у вас есть много разных приложений или устройств, которые направляют все это. В частности, в случае стримеров контроль над тем, какая часть звука идет, где крайне важно, чтобы ваш поток не был полной катастрофой.
Существуют аппаратные решения, такие как внешняя микшерная палата, которая может позаботиться обо всем за вас. Это здорово, но они недешевы и требуют немного места. И много кабелей.
Настройка Voicemeeter Banana
Во-первых, вы хотите загрузить приложение по ссылке ниже, но убедитесь, что вы получаете приложение Voicemeeter Banana, а не обычное Voicemeeter.
По той же ссылке вы также должны скачать бесплатный виртуальный аудио кабель. Вам разрешен один бесплатно, и вы поймете, почему это важно в следующих шагах. Это zip-файл, поэтому распакуйте его и откройте исполняемый файл для вашей версии Windows (x86 или x64).
Перед тем, как возиться с ним, вам нужно установить Voicemeeter Banana в качестве аудиоустройства по умолчанию для Windows 10. Таким образом, все будет проходить через приложение.
Нажмите на значок динамика в правом нижнем углу и выберите « Voicemeeter Input» (VB-Audio Voicemeeter VAIO). Смущает, да, но так и должно быть.
Добавление ваших устройств вывода
Сначала давайте посмотрим на область устройства вывода Voicemeeter Banana. Чтобы прослушивать звук с вашего компьютера, вам необходимо настроить любое аппаратное обеспечение, которое у вас есть для работы. Есть три выхода (A1, A2 и A3) с соответствующими элементами управления. Цветные рамки на изображении выше показывают, что и с чем соотносится.
У вас может быть три отдельных устройства, на которые Voicemeeter может отправлять аудио. В моем случае у меня есть набор настольных колонок, пара наушников и игровая гарнитура, все они подключены к выходу.
Нажмите на соответствующий вывод, и вам будет представлен список всего, что подключено к вашему ПК и может обрабатывать аудио. Вы также заметите, что все там дважды, с предисловием WDM или MME (есть и другие, но это те, о которых мы сейчас заботимся). Сначала выберите аудиоустройство с WDM, и если у вас есть какие-либо проблемы, попробуйте MME. Но вы всегда должны убедиться, что вы последовательны.
Это касается и устройств ввода звука; вход и выход должны совпадать. Так что WDM для WDM или MME для MME.
Каждый отдельный аудиовыход может управляться с помощью ползунка и смежных элементов управления в правом нижнем углу окна Voicemeeter Banana. У ползунка есть тонна диапазона для получения нужной громкости, но вы также можете отключить звук каждого из них по отдельности, добавить настройки эквалайзера или перейти от стерео к моно, если хотите.
Настройка ваших аудио входов
Выбор устройства ввода точно такой же, как и выбор выходов, но вы делаете это в левой части окна. Захват бесплатного виртуального аудиокабеля, описанного выше, вступает в игру здесь, поскольку он предоставляет вам дополнительный вход, который вы можете использовать. Если вы хотите больше, бросьте разработчику немного денег и сложите их.
Ваш первый аппаратный ввод должен быть вашим микрофоном (не забывая, чтобы он совпадал с WDM или MME. Следующим может быть что угодно, аппаратное или программное обеспечение. Чтобы сделать это с приложением Xbox или Skype или Discord, вам просто нужно указать соответствующее приложение для использования. виртуальный кабель в качестве его выхода.
Виртуальные входы
Пока мы установили в основном аппаратное обеспечение (и поддельное оборудование). Звук поступает в ПК, затем выходит на динамики или наушники, о которых вы говорите. Но затем мы перейдем к виртуальным входам.
Поскольку я смотрю на это с точки зрения потоковой передачи, цветные прямоугольники выше показывают, как подходить к виртуальным входам B1 и B2. B1 — это все ваше аудио в Windows (помните, что ранее в качестве устройства воспроизведения по умолчанию использовалась настройка Voicemeeter Input), и оно должно быть настроено таким образом, чтобы вы могли слышать звук с любых выходов, подключенных к компьютеру. B2 — это потоковое аудио, то есть все, что отправляется вашим зрителям с помощью таких программ, как XSplit и OBS.
Почему это важно? Вы не обязательно хотите, чтобы ваш поток слышал звук с определенных входов, и вы определенно не хотите, чтобы ваш поток аудио удваивался с вашим звуком Windows и передавался на те же динамики.
Вам нужно помнить, что все, что вы хотите микшировать вместе со звуком Windows, вы отправляете на канал B1. Затем вы можете отправить B1 на выход A1, A2 или A3 или их комбинацию.
Возможно, вы захотите начать изменять это и отправлять только выбранные аппаратные входы на выход, если вы хотите изолировать определенный фрагмент аудио. Если вы хотите контролировать свой микрофон, например, не смешивая его с каким-либо другим звуком или не отправляя его в свой поток, вы можете настроить его выход на наушники и отключить все остальное.
Как и в случае с аппаратными выходами, каналы B1 и B2 имеют свои собственные элементы управления в правом нижнем углу.
Использование Voicemeeter Banana с XSplit и OBS для ваших потоков
Теперь, когда мы все настроены, мы можем перейти к получению нужного аудио для вашего потока. Так как все контролируется Voicemeeter Banana, ваше потоковое программное обеспечение очень мало связано с этим.
Вот как настроить XSplit и OBS.
Добавление Voicemeeter Banana audio в XSplit
Выполните следующие быстрые шаги:
Теперь все, что вы отправляете на канал B2 в Voicemeeter Banana, будет перенесено в XSplit.
Добавление бананового аудио Voicemeeter в OBS
Следуйте этим простым шагам:
Теперь все, что вы отправляете на канал B2 в Voicemeeter Banana, будет перетекать в OBS, тогда как все, что подключено к ПК, отключено, поэтому вы не получите ни удвоения, ни эха.
Последние мысли о Voicemeeter Banana
Voicemeeter Banana — это одна из тех программ, о которой вы не знали, что вам нужно, но тогда вы не сможете жить без нее. Он элегантно спроектирован, и, как только вы поймете основы, его не составит особого труда.
Если вам это нравится, обязательно пожертвуйте, чтобы поддержать проект. Это стоит того.